Multirotor inspection drone · Multirotor mapping & LiDAR drone

DJI Mavic 3 Enterprise (3E / 3T)

Small folding enterprise drone: 3E with mechanical-shutter mapping camera, 3T with thermal camera.

Made by DJI · Official page · Spec sheet

Whirrwork assessment, not a lab test

Not enough evidence to rate

  • Only 1 independent source found; at least 2 are needed.
  • No independent field trial or test of how well it does the job (certifications cover safety or airspace rules, not performance).

1 independent source found · spec transparency 5 of 9 key specs published. How we rate.

Specs (maker-published)

SpecValueAs published · source
Weight0.915 kg“Weight (with propellers, without accessories): Mavic 3E 915 g, Mavic 3T 920 g” enterprise.dji.com
checked Oct 26, 2026
Runtime / flight time45 min“Max Flight Time (no wind): 45 minutes” enterprise.dji.com
checked Oct 26, 2026
Max wind resistance12 m/s“Max Wind Speed Resistance: 12 m/s” enterprise.dji.com
checked Oct 26, 2026
Operating temperature-10 to 40 °C“Operating Temperature Range: -10° to 40° C” enterprise.dji.com
checked Oct 26, 2026
Range15 km“Max Transmission Distance (unobstructed): FCC 15 km, CE/SRRC/MIC 8 km” enterprise.dji.com
checked Oct 26, 2026

Not published by the maker (or not found yet): Payload, Top speed, Ingress protection (IP), Sensors.

Independent evidence

  1. Independent certification or government vetting list Meets a stated rule or standard (not a performance test)

    EU drone class identification label C2 (with low speed mode): DJI Mavic 3E EU / Mavic 3T EU
    EASA, "Drones for EU operations" list, 2026

    Listed by EASA with class C2 (with low speed mode). EU class marks are issued after conformity assessment against Regulation (EU) 2019/945; they concern safety and airspace rules, not job performance.

Jobs it can do

From its robot type. Whether it suits your site depends on the specs above and on the job's checklist.

Compare with other multirotor inspection drones